by joeyb6571 on Wed Feb 10, 2010 6:06 am
Thanks Derrick, the only thing not in the picture is the colored plugs. You can see the holes in the board where they go. What i did was buy two 99cent wood door knobs the kind that most folding doors use and then drilled them out in the back and glued in a 3/8in dowel about 1/2inch long so they fit in the holes. I dipped each one in one of the paint colors which gives them a real thick coat. The first scoreboard i made used golf tees and everyone complained they could not see the score from the other end so I thought this might solve that problem for all of my blind friends. LOL